Heat Pump Installation Cost Calculator
Build a planning estimate for installing an air-source heat pump. Choose home size and system tier, then refine with ductwork condition and your local labor market before you book installs.
Estimated heat pump installation cost
Enter your project details and calculate to see a planning estimate.
This is a planning estimate, not a contractor quote. Actual costs vary by location, home condition, material availability, permits, and project complexity.
Planning rates for cost year 2026 (national baselines × state regional factors). Not a contractor quote.
Main cost factors
Home size / tonnage
Larger homes need more capacity and often more labor to install and commission the system.
Climate and backup heat
Cold-climate and dual-fuel designs raise equipment cost versus a standard air-source heat pump.
Ductwork and region
Leaky or undersized ducts and high-cost labor markets increase installed totals versus national averages.
Cost table
| Item | Low | Typical | High |
|---|---|---|---|
| Standard air-source heat pump | $6,000 | $10,000 | $15,000 |
| Cold-climate / high-efficiency | $9,000 | $14,000 | $20,000 |
| Dual-fuel (heat pump + furnace)Includes furnace equipment share | $10,000 | $16,000 | $24,000 |
National average explanation
Across the U.S., many air-source heat pump installs cost $6,000–$18,000 in 2026. The calculator scales that national band by home size, climate tier, ductwork, and regional labor differences.
Browse more in Heating & Cooling.
More resources
Frequently asked questions
Does the estimate include duct repairs?
- You can add sealing or full duct replacement as options. Major redesign, electrical panel upgrades, or new line sets may still sit outside the planning range.
What is the difference between climate tiers?
- Standard air-source units fit milder climates. Cold-climate models and dual-fuel (heat pump + furnace) setups cost more up front but improve winter performance where needed.
Should I still get in-home load calculations?
- Yes. Use the calculator for budgeting, then ask contractors for Manual J sizing and matched outdoor/indoor model numbers before comparing bids.
Methodology & estimate disclaimer
Production model: base equipment × capacity (home size) × climate tier × ductwork × complexity × region.
Actual costs vary by location, home condition, material availability, permits, and project complexity. Read our methodology, the national cost bands table, editorial policy, and disclaimer. Planning provenance uses the internal model and, where listed, public datasets for context—not invented third-party bid averages.
Planning sources
- Home Cost Atlas national planning model v1 (version: v1) — Modeled national planning ranges used for cost guides and seed CostRecords. Values are planning estimates synthesized for budgeting context, not observed contractor invoices or bid samples.
- Home Cost Atlas planning baselines v1 (version: v1) — Internal baseline spreads (low / typical / high) by project category. Intended for calculator scaffolds and aggregation fallbacks; not a dataset of paid jobs.
- EIA Residential Energy Consumption Survey (RECS) / residential energy data (version: RECS / residential energy public tables) — Equipment stock and energy-use context for HVAC and envelope planning scopes. Does not provide contractor install invoices.
- DOE Energy Saver — home heating systems — System types and efficiency context for HVAC / heat-pump planning.
Public datasets supply labor and market context for the planning model. They are not aggregated contractor invoices or bid samples.
Cost year: 2026 rate book · Data version: hca-national-model-v1+cluster-context-2026 · Last reviewed: July 24, 2026